Stainless steel horizontal pipeline/in-line pump

Short Description:

The rotor shafts are all connected by friction welding process 316

The motor adopts high-temperature wire and Class B insulation grade

Product Detail

Product Tags

Product description

The stainless steel horizontal pipeline pump is designed by our unit's scientific and technical personnel and domestic water pump experts using a nationally recognized hydraulic model, using the performance parameters of the IS type centrifugal pump, and cleverly combining the design on the basis of general horizontal pumps.

This series of horizontal pipeline pump products has the advantages of high efficiency, energy saving, low noise and reliable performance.

It meets the standard requirements of JB/T 6878 of the International Ministry of Machinery, and the products are designed and manufactured according to the international ISO82858 standard. Our company uses all-copper motors, Y2, Y3 and other series motors, and can be configured with 304, 316, 316L and other stainless steel materials, and can help you choose the appropriate stainless steel material according to your actual needs.

Conditions of Use

1. Applicable medium: the content of solid insolubles does not exceed 0.1% of the unit volume, and the particle size does not exceed 0.2mm. (If the medium contains fine particles, a wear-resistant mechanical seal must be used, please specify when ordering.)

2. The ambient temperature does not exceed 40°C, the relative humidity does not exceed 95%, and the altitude does not exceed 1000m.

3. The conveying liquid cannot cause obvious corrosion to the 304 or 316 material (special liquid order query);

4. The pH value of the conveying medium is 304 (4-10), 316 (4-13);

5. The kinematic viscosity of the conveying medium is 7X10^‐7~23X10^-6㎡/s.

Model Description

SGR	D	W	80	-125	(A)	(B)	S
Pipeline centrifugal pump	Single phase	Horizontal	Pump inlet and outlet nominal diameter	Impeller Nominal Diameter (mm)	The first cut	The second cut	Stainless steel